Coating Products

NBR also known as nitrile rubber, is a synthetic rubber made from acrylonitrile and butadiene.

The fluoropolymer coating consists of a precise mixture of resins and fluoropolymers to create a dry lubricant coating.

Epoxy protective coatings take longer to cure compared to other types of protective coatings but make up for it with their superior hardness and compressive strength.

ECTFE is partially fluorinated, semi-crystalline polymers offering a unique combination of properties for particularly demanding applications.

Fluorinated Ethylene Propylene (FEP) is a copolymer of hexafluoropropylene and tetrafluoroethylene that shares PTFE's chemical resistance and useful low friction properties, but is more easily formable.

Derived from fluorinated hydrocarbons, it is highly resistant to oils, fuels, acids, and a wide range of chemicals.

Liquid Crystal Polymer is an aromatic polyester resin, it is known for having exceptionally high heat deflection temperature.

Magnacoat coatings are thick-film polymer and fluoropolymer coatings with a virtually pore-free surface.

PA4.6, belonging to the Nylon family, it is a heat resistant polymer. It is synthesized by polymerizing 1,4 diaminobutane with adipic acid. Although it is similar to Polyamide 6 or Polyamide 6,6 from a chemical point of view, it is characterized by better dimensional stability.

PA66 is a semi - crystalline thermoplastic material which possesses one of the highest melting points among the available polyamides on the market. Its qualities offer rigidity and consistency which are maintained at high temperatures.

Polybenzimidazole is one of the best engineering plastic coatings on the market. It has the strongest heat resistance and mechanical property retention of any unfilled plastic at temperatures above 200⁰C.

PC is melted and forced into a mold with high pressure to give it the desired shape to provide the necessary coating properties.

PEEK is a colorless organic thermoplastic polymer in the Polyaryletherketone. PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained at high temperatures.

PEK delivers high thermal dimensional stability, low flammability, outstanding chemical resistance, and excellent mechanical properties over a wide temperature range.

Polyethyleneimine is an amorphous engineering thermoplastic with amber transparency.It is a positively charged polymer made up of primary, secondary, and tertiary NH2 groups.

PHA is a naturally produced thermoplastic polyesters that offers low impact, bio-based alternative coating to traditional fossil based feedstocks. PHA exhibit excellent barrier properties against oil and grease, water, and moisture.

Polyphenylene sulfide is a resin bonded polymer coating with outstanding resistance to chemical reactivity and thermal degradation. Combined with PTFE, PPS produces a hybrid coating that can be applied to substrate with low coefficient of friction and good wear resistance. PPS is a partially crystalline, high-temperature performance polymer that has a high melting point of approximately 280⁰C, strong chemical resistance and is inherently flame retardant.

PPSU is also often specified as a material for coating wires and electrical leads.

Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer coating known for its exceptional non-stick properties, water repellency, chemical resistance, and stability across a wide temperature range.

PVDF coatings are a combination of resins, solvents, pigments and additives that create an effective coating formula to clad metal architecture.

SBR is a synthetic rubber made by copolymerizing styrene and butadiene. SBR is extremely durable and abrasion-resistant.

The TempCoat name comes from the higher temperature rating these coatings have over other polymer types. Tempcoat has excellent antifriction properties and functions well in applications such as sliding bearings.